Showing posts with label Ecology-in-Action. Show all posts
Showing posts with label Ecology-in-Action. Show all posts

Friday, May 20, 2016

Dream Team Research Project-Ecospheres


Ivanna, Matthew, Nhy, Nhung

For our research project, we are attempting to recreate our original ecosphere conditions, which resulted in exceptionally large Daphnia magna. We are replicating our original ecosphere in nine new different ecospheres, where the only variable we will be changing is the type of water in the system. In three of the ecospheres, there will be only pond water (approximately 2.7 liters), in three others there will be tap water (approx. 2.7 liters) and nutrients, and in the last three there will be a mixture of the pond water and the tap water + nutrients (adding up to approx. 2.7 liters). Already in our experiment, we have experienced some obstacles in attempting to recreate our original ecosphere as there was not enough resources to put two Bacota in each one or 20 daphnia, but regardless we have done our best to keep all variables the same in all ecospheres with the exception of the type of water. Over the next week or so, we will be monitoring the pH levels of the water in each of the ecospheres as well as oxygen levels and other elements we can test with a water testing kit. Below are pictures of some of our team members working on our ecospheres having the time of their lives.



Ecology project: The Effect of Varying Soil pH on the Rate of Tomato Plant Transpiration by: Taylor Jones, Amy Latimer, Lisa Merritt & Shauna Steele

To measure the effect of pH on transpiration, we will use 18 tomato plants as model organisms over a two week period. Each will be planted in the same soil, left in the same location, and watered the same amount at the same time. Three tomato plants will grow in unaltered potting soil, and Three tomato plants will grow in soil at different pH levels. The pH levels are as follows: three in strongly acidic conditions, three in moderately acidic conditions, three in strongly basic conditions, three in moderately basic conditions, three will be in neutral conditions, and three will be the control plants where the pH is not changed. In order to determine the rate of transpiration the plants will be checked twice a day and the weight and pH will be taken. Along with the weight and pH data observations about the plants condition will also be noted.
Objectives:
  • To explore the process of transpiration
  • To practice reading pH levels
  • To explore the role of stomata in water loss
  • To explore how minerals and water are transported from root to shoots
  • To determine how transpiration (or lack thereof) can affect ecology short and/or long term
Hypothesis:
If plants are placed in a more basic soil, then the rate of transpiration will increase due to the the tendency of stomata to open up in less acidic environments.
Null hypothesis:
Soil pH has no effect on plant transpiration.
Prediction:
We predict that tomato plants in more basic soil will lose more water in more acidic soils.
Background Information & Significance:
When conditions are too hot, we get a little sweaty. Plants “sweat” as well. They lose water through their leaves, which is similar to how we lose water through our skin. The process of plants losing water is called transpiration. Transpiration is the loss of water via evaporation from the aerial parts (or parts completely exposed to air) of a plant. It takes place when two conditions are met: stomata (guard cells) are open and the air surrounding leaves is drier than the leaves inside. The stomata are located on the bottom of the leaves of plants which open and close in order for the plant to breathe in carbon dioxide from the surrounding air. Carbon dioxide is an essential molecule that is needed for plants for photosynthesis. When stomata open, water inside the plant is lost and evaporated into the air for us to breathe thus continuing the water cycle between air, plants and humans. Stomata regulate the process of transpiration in order to avoid the plant from losing too much water.
Transpiration is also important for plants because it helps with cooling them down in conditions that may be too hot for them. Plants need to cool down in order to avoid having their metabolic functions from slowing down which could lead to slow growth and flowering (or even stopping those processes altogether).  Transpiration also helps in moving water and changing the water pressure in plant cells which in turn help move minerals and nutrients up the plant from the roots to the leaves for photosynthesis. It’s pumping action helps move these needed materials against gravity with the help of (capillary) xylem water channels, the cohesion of water molecules, and the negative pressure that is caused by the transpiration process. This process is important especially when water is evaporating from the leaves of the plant. The significance of our experiment is that it provides proof of how certain growing practices can stunt plant growth or even pollute our soils that will hurt our plants or even our ecology on a large scale. This experiment will provide information on what conditions work best for plant transpiration which relates to how much the plants will grow and how we can sustain our soil pHs so that soils do not become acidic and pollute.
Progress:
On Monday the tomato plants were planted in approximately 300 grams of Black Gold potting soils. The control and neutral plants were put aside and will be allowed to grow without treatment. The initial pH of each plant was taken as well which most plants were at a pH of between ~5.5 and 6. Six of the plants were treated with Gypsum in order to make the pH more basic and six of the plants were treated with Limestone in order to lower the pH. After taking the pH's several time with a pH meter that was purchased no matter how much limestone and gysum was added the pH did not chage. Per advise from Gwen the team decided to wait until the next day and recheck the pH's in case a. it took time for the pH's to adjust or b. the pH meter was malfunctioning. After changing the pH meter that was obtained from the chemistry lab. On Wednesday the pH's were checked again and remained basic. At that time the formulas in order to change the pH were changed to vinegar in order to raise the pH and ammonia to lower the pH. On Thursday once in the morning and once in the afternoon the first reading of weight and pH were taken. (figure 1). Reading of pH and weight will be taken in the morning and the afternoon through May 25, 2016 except for Friday's and Weekends. The tomato plants will also be watered every couple days as needed with 3 sprays on the leaves and 3 sprays in the soil. All of the plants will have the same water at the same time, checked at the same time and access to the same amount of light as well We look forward to sharing our results with you!
Second Check of Ph and weight by: Lisa Merritt Date: 5/19/2016 am check @ 9:20 am
Pot #
Ph
Weight (g)
Observations
VA #1
5.93
355
Very good condition
VA#2
5.37
316
Was coming out of dirt, a little wilty. Added more soil
VA#3
5.68
341
Very good condition
MA#1
6.64
345
Wilty leaves @ the bottom
MA#2
6.65
358
Good condition
MA#3
6.93
392
Good condition
VB#1
7.68
311
Good condition
VB#2
7.59
321
Coming out of dirt. A little wilty pressed soil down
VB#3
7.42
368
Good condition
MB#1
7.30
441
Good condition
MB#2
7.36
436
Small relative to the others but good condition.
MB#3
7.77
354
One of the bigger plants. Very good condition
N#1
7.13
367
Tiny bit wilty @ top leaves.
N#2
7.03
355
Leaning and tiny wilt @the bottom
N#3
6.81
349
Leaning and leaves outside of the pot a bit wilty
C#1
6.42
451
One dead leaf @ the bottom
C#2
6.63
359
Leaning but good
C#3
6.11
319
Best one!
Figure 1: Data table of am pH and weight recordings on 5/19/2016
Displaying IMG_29361.jpg
Image 2: Tomato plants on their first measuring day!
Image 1: Tomato plants on their planting day!

Displaying IMG_29361.jpg

Research Project of 4.0A group

Ecology Research Project: Plant Growth Proposal By Ali, John, Tony, Robert, and Kyle




This research aims to elucidate into the relationship between soil contents and plants’ indeterminate growth. Specifically, soil from four different locations will be collected, and tested correspondingly to measure the level of nitrogen (N), phosphorus (P), potassium (K), and pH. These soil contents that are assumed to contribute to plants’ growth.. For this reason, this research requires instruments with the capacity to measure levels of N, P, K, and pH in soil. The four different locations are divided into three categories including soil from city, soil from forest, and soil from beach. Since, there is a density of human populations in cities making it important to be accurate on how the levels of the soil contents affects the plant's’ growth, two soil samples will be randomly collected from cities from two different locations including soil from Edmonds Community College and soil from Shoreline. The soil sample collected from a forest will be collected in a random location of Meadowdale Park. Furthermore, the soil sample collected from beach will be collected from beach. Plant that will be utilized in this experiment will be Zinnia.
            Fertile and healthy soil is the basis for healthy plants. This research is significance in multiple ways. Firstly, the research experiment could help the Environmental Protection Agency (EPA) and the scientists at Edmonds Community College to identify soil contents in the soil so that they could devise solutions to control them.

Figure 1. Zinnia


            On Wednesday 18th May 2016, we took soil from Meadowdale Park, Seattle, EdCC, Edmonds Beach to start our research project. We used Zinnia for our experiment which is considering as fast growing plant. We made 5 categories and 3 samples for each soil which includes above four and potting soil (so total 15 pots). Before planting the plants in the pot, we did N,P,K, and pH measuring test for each soil with testing kit.



Figure 2. Phosphorous testing


Figure 3. pH testing

Figure 4. Nitrogen testing




            And then we measured total mass, length of the shoot & root, number of the leaves, color of the stem & leaves, and length of the first internode. After collecting all the data, we planted the plant to pots with each designed soil. And then we watered them each with one cup of water.
         
Figure 5. Measuring

Figure 6. Planted Zinnia to various soil


             For additional experiment, we made five more pot which are to examine germination of the seeds in different condition of soil. Normal time to germinate is 10-15 days which is longer than our experiment day but we decided to do it to see what will happen. We watered them each with half cup of water. Every planted pot were placed under the light in the lab and we will going to water them on 23rd Monday and finish the experiment on 25th Wednesday.
Figure 7. Seed germination experiment






Reference: https://orchidflowers.wordpress.com/2011/04/11/growing-zinnia-flowers-from-seeds/

Wednesday, May 18, 2016

Herbivore Project by [Fun-Guys]

Members: Brian, Eunice, Jaena, Thomas, Reylene

The purpose of our project is to test the preference and the performance of the Manduca sexta (Tobacco Hornworm). We are comparing two plants (TBD) and testing which plant does the caterpillar prefer. Also we are testing whether the plant they prefer to eat is the plant they benefit from the most.
The method of our experiment for the preference is that we cut the two species of leaves to equal shape and size, and place them inside a petri dish with a caterpillar. The dish would be checked after some scheduled time and noted which species of leaf was most eaten. For the performance, the caterpillar would be weighed before placed in the petri dish with only one kind of leaf. After sometime, the caterpillar would be weighed again, and the gained weight among the caterpillars would be compared by the type of leaf they were assigned to.
For the mock experiment, on Monday, May 16, Petunia and Nicotiana was used for the two species of plant. The leaves were cut in circles and 10 dishes were made to test whether the apparatus works. For the second experiment, six dishes, three for each plant, were set up additionally to test performance. The weight of the caterpillar at this time ranged from 0.9g to 1.2g. Both experiments were left to run for 24 hours.  Afterwards, data was collected and the dishes were reset to run another 24 hour period experiment.

photo_2016-05-16_22-18-49.jpg
photo_2016-05-16_22-18-51.jpgphoto_2016-05-16_22-18-53.jpg
photo_2016-05-16_22-18-48.jpg

The following day, after about 24 hours past, the results of the mock experiment were checked. It turned out that the circles were not big enough to suit some caterpillar's appetite and it seemed like some leaf and the caterpillar was dried out by being placed under the light. So we set up a smaller trial of five new petri dishes to see if they would do better in the dark. The caterpillars from the Monday’s experiment and one new performance dish was put under the light on moist paper towel to see if it would do better with some moisture.

photo_2016-05-18_02-35-32.jpg

photo_2016-05-18_02-35-36.jpgphoto_2016-05-18_02-35-34.jpgphoto_2016-05-18_02-35-38.jpg



Data from May 17, 2016:


F = Full leaf, H = Half Leaf, 0 = No leaf was eaten

Sample Number
Petunia (F/H)
Nicotiana (F/H)
000
1H
0
001
1H
0
002
0
0
003
0
0
004
1F
1F
005
1F
1H
006
2F
1H
007
1F/1H
1H
008
1F/1H
0
009
0
1F